Home ProductsRCBO Circuit Breaker

4.5KA 300mA RCBO 18mm Residual Current Circuit Breaker

Certification
China WENZHOU SANTUO ELECTRICAL CO.,LTD. certification
China WENZHOU SANTUO ELECTRICAL CO.,LTD. certification
I'm Online Chat Now

4.5KA 300mA RCBO 18mm Residual Current Circuit Breaker

4.5KA 300mA RCBO 18mm Residual Current Circuit Breaker
4.5KA 300mA RCBO 18mm Residual Current Circuit Breaker

Large Image :  4.5KA 300mA RCBO 18mm Residual Current Circuit Breaker

Product Details:
Place of Origin: China
Brand Name: SONTUOEC , WZSTC
Certification: CE
Model Number: STE-40LE
Payment & Shipping Terms:
Minimum Order Quantity: 1000PCS
Price: Negotiable
Packaging Details: 100pcs/ctns
Delivery Time: 15DAYS
Supply Ability: 3000PCS/DAYS

4.5KA 300mA RCBO 18mm Residual Current Circuit Breaker

Description
In: 6,10,16,20,25,32,40A Install: Din Rail
Brand: SONTUOEC Type: Electrical
Color: White Breaking Capacity: 4.5KA
Name: Rcbo Device
High Light:

18mm Residual Current Circuit Breaker

,

300mA Residual Current Circuit Breaker

,

4.5KA Residual Current Circuit Breaker

SONTUOEC 18mm Width Economic type residual current circuit breaker with overload protection RCBO 40A 30mA 100mA 300mA electronic type  ELCB

 

SONTUOEC Economic type 18mm width residual current circuit breaker is in conformity with the standards of IEC61009.It can cut off the fault circuit immediately on the occasion of shock hazard or earth leakage of trunkline.Thus it is suitable to avoid the shock hazard and fire caused by earth leakage.It can be used in circuits up to single phase 230V,three phase 400V,50 or 60Hz.

 

 

Normal working & installment conditions
1.Ambient temperature: -5ºC~+40ºC, 24 hours average temperature not exceed +35ºC.
2.Installment plance altitude: ≤2000m
3.Gas relative humidity:not exceed 50% at +40ºC, higher humidity allowed at lower temperature.
4.Pollution degree: 2 class
5.Installment condition: Mounted in the place without obvious impact or shock, no dangerous(explosion) dielectric without corrosive metal or damaging isolation gas(conductive dust).
6.Installment method: TH35-7.5 mounted rail, can be installed in distribution board, case or box. Generally mounted vertically. Tilted angle between mounting face and vertical face not exceed ±5°.
7.Mounted Category: II,III class.

 
 

SandardIEC/EN61009-1
Electrical
features
Type(wave form of the earth leakage sensed) Electronic type
Rated current InAA,AC
PolesP1P+N 
Rated voltageVAC 230
Rated Current : 6,10,16,20,25,32,40A
Rated sensitivity I△nA0.01,0.03,0.1,0.3,0.5
Insulation voltage UiV500
Rated residual making and
breaking capacity I△m
A630
Short-circuit current I△cA6000
SCPD fuseA
6000
Rated frequencyHz50/60
Pollution degree 2
Mechanical
features
Electrical lifet4000
Mechanical lifet10000
Protection degree IP20
Ambient temperature
(with daily average ≤35℃)
-25~+40
Storage temperature-25~+70
InstallationTerminal connection type Cable/U-type busbar/pin-type busbar
Terminal size top/bottom for cablemm225
AWG18-3
Terminal size top/bottom for busbarmm225
AWG18-3
Tightening torqueN*m2.5
In-lbs22
Mounting On DIN rail EN 60715(35mm)by means of fast clip device
Connection From top and bottom

 
 
About Us
 
WENZHOU SANTUO ELECTRICAL CO.,LTD lives in Liushi,Yueqing, Wenzhou, China, We have a good reputation around the world,
 
We can offer you completive price, Continuance support and good After service, also, our company can ensure the quantity of our Products, they are durable and long life

 

 
Wenzhou Santuo Electrical Co.,Ltd. Browse Categories
 
RCBO Circuit Breaker
RCCB Circuit Breaker
MCB Circuit Breaker
MCCB Circuit Breaker
ELCB Circuit Breaker
AC Contactor
Magnetic Contactor
Air Conditioning Contactors
Thermal Overload Relay
Magnetic Starter
Electrical Isolator Switch

Contact Details
WENZHOU SANTUO ELECTRICAL CO.,LTD.

Contact Person: Sunny Zhang

Tel: 86-13868610160

Send your inquiry directly to us (0 / 3000)