|Breaking Capacity:||3KA,4.5KA,6KA||Standard:||IEC 60947-1 ; IEC60898|
|Cover:||Transparent Small Cover||Texture:||Red/green Instruction For Turn On Or Turn Off|
miniature circuit breaker,
miniature current circuit breaker
STM22-63 series high breaking capacity mini circuit breaker is used in AC50/60Hz, rated voltage of 230V
3, 4 poles 400V, rated current to 63A for overload and short-circuit protection as well as for unfrequented switching under normal case.It is used extensively for industry, commercial and household.This product conform to IEC60898 standard.
1. Application:For protecting cables and equipments against overload and short circuit.
2. General rules for choosing MCB.
1. In complicance with IEC/EN60898-1
2.With indicator function in the contact position.
3.Transparent cover designed to carry label.
4.Bilateral busbar wiring capabilities to adapt to the wider use of premises.
5.Maximum connecting ability of 25mm2, wiring torque 3N*m, applicable to a variety of installing equipments, wiring stronger
6.Protection calss: IP20
7. Guarantee: 2 Years
2).There are 3 curvve characteristics for magnetic operation:
B curve (3-5In) protection and control of the circuits against length cables in TN and IT systems.
C curve (5-10In) protection and control of the circuits against overloads and short-circuits; protection for resistive and inductive loads with low inrush current.
D curve (10-14In) protection and control of the circuits against overloads and short-circuits; protection for circuits which supply loads with high inrush current at the circuit closing (LV/LV transformers,breakdown lamps.)
|Rated Short-circuit capacity(Icn)||3KA,4.5KA,6KA|
|Magnetic releases||B curve: between 3and 5 In|
|C curve: between 5and 10In|
|D curve: between 10 and 14In|
|Electro-mechanical endurance||over 6000 cycles|
|Rated current In||A||1,2,4,6,10,16,20,25,32,40,50,63|
|Rated voltage Ue||V||AC 240/415|
|Insulation voltage Ui||V||500|
|Rated breaking capacity||A||45,00 ;6,000|
|Rated impulse withstand voltage(1.2/50)Uimp||V||4000|
|Dielectric test voltage at ind.Freq.for 1 min||Kv||2|
|Thermo-magnetic release characteristic||B,C,D|
|Reference temperature for setting
of thermal element
(with daily average ≤35℃)
|℃||-5~+40(Special application please refer to
temperature compensation correction)
|Installation||Terminal connection type||Cable/Pin-type busbar|
|Terminal size top/bottom for cable||mm2||25|
|Therminal size top/bottom for busbar||mm2||25|
|Mounting||on DIN rail EN 60715(35mm)by means of fast clip device|
|Connection||From top and bottom|
Contact Person: Mr. Sunny Zhang