|Standard:||IEC 60947-1||Coil Voltage:||24,220,240,380,415V|
air conditioner compressor contactor,
Fixed Air Conditioner Compressor Contactor , Three Phase Magnetic Contactor
Operating Conditions &Installation method
1,The ambient air temperature:-5ºC~+40ºC;
2,The altitude of the site of installation does not exceed 2000 neters aboce sealvels;
3,The relative humidity of the air in a maximum of not more than 50% at+40ºC, relative humidity, low temperature can be high up to 90%; for example 20 degrees, take special measures due to temperature change should occasionally produce.
4, installation type: III.
5, all directions shall not exceed ±50.
6, The contactor screw installation.
|Coil rating||1Pole contactors||2 pole contacts|
|Nominal coil voltage||24||120||208/240||277||24||120||208/240||277|
|Nominal coil resistance Ohms||18||420||1800||2500||11||237||1000||1600|
|Maximum pick up voltage||18||88||177||221||18||88||177||221|
|Maximum drop out voltage||6-15||20-70||40-140||50-165||6-15||20-70||40-140||50-165|
|Nominal rush Va@50Hz||31||31||31||31||33||33||33||33|
|Nominal rush Va@60Hz||28||28||28||28||30||30||30||30|
|Nominal rush Va@50Hz||6||6||6||6||8||8||8||8|
|Nominal rush Va@60Hz||5||5||5||5||6.5||6.5||6.5||6.5|
|Maximum coil voltage||30||132||264||300||30||132||132||300|
Q 1. what's the payment term?
A. We accept TT,30% deposit and 70% balance agaisnt copy of BL
Q 2. how's the delivery time ?
A. usually it will take about 25 days for production
Q 3. tell me the standard of package?
A. Normally are cartons, but also we can pack it according to your requirement.
Q 4.Would you accept to use our logo ?
A.If you have good quantity,it absolute no problem to do OEM.
Q5. Can i take some samples?
A: Yes, we support to take samples before place the order. Just feel free to contact with us if you have any requirements.
Q6. Are you original Factory?
A: Yes, we have our own factory .
Q7. How can you make sure the quality of the products?
A: We will accord to international quality standards to inspect every item before leaving our factory.
Contact Person: Mr. Sunny Zhang